PSC 26-Key Instructions d'exploitation télécharger pdf (Page 35)

Scanning Bar Codes

Quick Reference Guide 33

Scanning Bar Codes

Laser Scanning

To use the scanning function on units containing a laser scanning module,

complete the following steps:

1. Select and open a bar code application, such as Microsoft

Word

Mobile.

Figure 25. Scanning a bar code

2. Aim the scan window at the bar code following the guidelines outlined

in Figure 26.

3. Press and hold the

<Scan> button (26 or 52-key only) or the trigger. The

laser scans as long as you hold the button or trigger until a good scan is

obtained. There is a 10-second timeout for attempting to scan.

4. Aim the laser beam at the center of the bar code.

• Position the unit close to the bar code when scanning small bar

codes.

• Position it at a distance when scanning larger bar codes.

• The laser is disabled after you release the key or after 10 seconds,

or once a good scan is obtained.

Press <Scan> (on 26 and 52-

key) or the Scan Trigger to ini-

tiate a scan with the Falcon.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 67 68

Pas de commentaire

PSC 26-Key Instructions d'exploitation Page 35