PSC Magellan 8500 Spécifications télécharger pdf (Page 121)

100

101

Product Reference Guide 6-3

• Lead wire or paper seal (as required by law).

Motion Test

This test verifies that the scale will not ‘zero’ when the weighing surface of

the scanner/scale is in motion.

1. Verify that the Zero lamp is On and the Remote Display reads

.00 pounds, 0.000 pounds or 0.000 kilograms.

2. Press lightly on the weigh platter of the scanner/scale with one

hand and

at the same time press and release the Zero switch on

the operator’s panel. The Zero lamp should turn Off and the

Remote Display should not display 0.00 pounds, 0.000 pounds

or 0.000 kilograms.

3. Remove your hand from the weighing platform and verify that

the Zero lam

p is On and the Remote Display reads 0.00 pounds,

0.000 pounds or 0.000 kilograms.

Automatic Zero Setting Test

This test verifies that the scanner/scale automatic zero setting mechanism

is operating correctly.

1. Place 0.0035 pounds (1.6 grams for metric) on the center of the

eighing platform. The entire weight must be placed on the

weighing platform at once for this test to be valid. The Zero lamp

should go Off and the Remote Display should read 0.005 pounds

(0.002 kilograms).

NOTE

The scanner/scale has an adaptive zero capture mechanism that re-zeros

the scale o

ver time if there is a slow change in the zero level; thus, if all the

weight is not placed on the weighing surface at one time, the Zero lamp

will remain On and the Remote Display will read 0.00 pounds or 0.000

pounds (0.000 kilograms). When the weight is removed, the Zero lamp will

turn off and the display will show a minus sign

. Press the Zero

switch to rezero the scale.

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 479 480

Commentaires sur ces manuels

Pas de commentaire

PSC Magellan 8500 Spécifications Page 121

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de codes-barres PSC Magellan 8500